







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterBacksplash, Tile & Flooring in Cutler Bay, FL
Backsplash, tile and flooring work in Cutler Bay usually runs $1,200 to $4,500 for a backsplash-only job and $6 to $14 per square foot for floor tile installed, depending on material and how much prep the substrate needs. That’s the range we quote against, and it’s the range we put in writing before any tool comes out of the truck. If you’re planning tile as part of a larger kitchen update, start with our Kitchen Remodeling in Cutler Bay page for how the whole job fits together.
Tile is the part of a kitchen or bath people notice first, and the part that fails first when it’s installed over a bad substrate. Cutler Bay sits on limestone and fill that shifts with our wet season, and the humidity here (we run 70 to 80 percent most of the summer) finds every shortcut in a tile job: lippage, popped grout, cracked thinset, mold creeping behind a poorly sealed backsplash. Bradford Remodeling Co Cutler Bay installs backsplash, tile and flooring to manufacturer spec on a correctly prepped substrate, documents the scope, and hands you a written 365-Day Done Right Promise when we close. Call (833) 620-5491 and a live person picks up.
This is a sub-service of our larger Kitchen Remodeling work, and we run it the same way: written price upfront, background-checked and uniformed technicians on site, and a guarantee that means something a year later.

Key Takeaways
- Backsplash-only jobs in Cutler Bay typically run $1,200 to $4,500; floor tile installed runs $6 to $14 per square foot.
- Every job gets a written price before we start and a 365-Day Done Right Promise when we finish.
- Our technicians have up to 22 years of experience with tile, substrate prep and grout work.
- Live person answers the phone 24/7 at (833) 620-5491.
When You Need Backsplash, Tile & Flooring
Tile problems in South Florida rarely show up as one dramatic failure. They show up as small, expensive annoyances. Here’s what we see most in Cutler Bay and the surrounding neighborhoods:
- Cracked or hollow floor tile. In Cutler Bay homes built in the 1980s and 1990s, we regularly find tile laid over plywood or a too-thin mortar bed. When the slab or subfloor flexes even a little, the tile pops and you hear that hollow tap when you walk across it.
- Grout that won’t stay clean, or mold behind the backsplash. Our humidity is the culprit. Cement grout is porous, and if the backsplash seams weren’t sealed properly at install, moisture works in behind the tile and stays there.
- A dated backsplash holding back a kitchen you’re otherwise happy with. A 4-inch builder-grade strip from 1995 is the single cheapest change that makes a Cutler Bay kitchen look current. We install glass, ceramic, porcelain, natural stone and large-format slab to specification.
- Tile lippage you can feel with your hand. One tile standing proud of its neighbor is an install error, not a material defect. It’s also a trip hazard and a spot where water pools.
- Slip risk on wet floors. Pool-adjacent kitchens, laundry rooms, and bathrooms need a tile rated for wet areas. We spec the coefficient of friction instead of guessing.
- You’re mid-remodel and the tile decision needs to come before cabinets. Floor thickness affects cabinet height and door swing. Getting the tile spec nailed down early saves a rework later.

Our Backsplash, Tile & Flooring Process
We don’t wing a tile job. Here’s the sequence we follow on every install, and it’s the same whether it’s a 30-square-foot backsplash or a full kitchen floor:
- Site visit and measurement. We measure the actual square footage, check the substrate, and note the condition of the existing surface. This is when we spot the deflection, the water damage or the uneven slab that drives the price.
- Written price, material confirmation and spec sheet. Before anything is ordered, you get a written price. We confirm the tile, the grout, the thinset and the membrane against manufacturer specs. If you’re coordinating with cabinet work and going with KraftMaid or Wellborn cabinetry, we schedule the tile so the floor goes under the cabinets, not up to them.
- Demo and substrate prep. Removing old tile and thinset properly is most of the job. We level the substrate, install uncoupling membrane where the floor calls for it, and waterproof wet areas with a certified membrane.
- Layout and install. We dry-fit the layout so cuts land in the right places and the grout lines run true. Then the tile goes down with full coverage thinset, no spot-bonding.
- Grout, seal and cleanup. We grout, seal where the material requires it, and leave the site clean. A squared-away job close means a clean floor, no thinset haze, and a signed written guarantee in your hand.
Backsplash, Tile & Flooring Pricing in Cutler Bay
Here’s the honest range. Prices vary by material and by how much prep the substrate needs, and we don’t guess at the door: the number goes in writing first.
| Item | Typical range | Notes |
|---|---|---|
| Kitchen backsplash, ceramic or porcelain | $1,200 – $2,800 | 30 – 60 sq ft, standard layout |
| Backsplash, glass or natural stone | $2,000 – $4,500 | Cutting and sealing add labor |
| Floor tile, ceramic or porcelain, installed | $6 – $10 / sq ft | Includes thinset, grout, basic prep |
| Floor tile, natural stone or large-format | $10 – $14 / sq ft | Needs more prep and sealing |
| Substrate repair or leveling | $400 – $1,800 | Quoted after the site visit |
| Waterproofing membrane, wet areas | $3 – $6 / sq ft | Bathrooms, laundry, behind splash |
| Grout removal and re-grout | $5 – $9 / sq ft | Full removal, new grout, seal |
What moves the price up: natural stone instead of porcelain, a herringbone or mosaic layout instead of a running bond, visible substrate damage, and tile over tile versus full removal. What keeps it down: a sound substrate, standard-size tile, and a straight-lay pattern. You’ll get a written price before any work starts, and if the site visit turns up something that changes the scope, that goes in writing too before we go further.
Free estimates. Call (833) 620-5491 and tell us the room and the square footage. A live person answers, 24 hours a day.
FAQs – Backsplash, Tile & Flooring
How much does a kitchen backsplash cost in Cutler Bay?
In Cutler Bay, a standard kitchen backsplash runs $1,200 to $2,800 for ceramic or porcelain over 30 to 60 square feet, and $2,000 to $4,500 for glass or natural stone. Material choice, layout pattern and the condition of the wall behind the old tile are the three things that move the number. Call (833) 620-5491 for an exact quote. Estimates are free.
Can you install tile over existing tile?
Yes, in some cases. Tile-over-tile works when the existing tile is sound, well-bonded, not cracked and within height limits so cabinet and appliance clearances still work. We check the substrate first, because in older Cutler Bay homes we often find cracked or hollow tile underneath, and that has to come out. If the existing floor fails the test, we recommend full removal and quote both options in writing.
How long does a backsplash install take?
A standard kitchen backsplash takes one to two days from demo to grout, plus a curing day before the sealant or caulk goes on. Floor tile in a typical kitchen runs three to five days including substrate prep, depending on square footage and layout complexity. We give you the timeline in the written scope so you’re not guessing when the mess clears.
Do you back the work with a guarantee?
Yes. Every completed project carries the 365-Day Done Right Promise: a written promise that if the tile, grout or flooring fails within one year of completion, Bradford Remodeling Co Cutler Bay comes back and corrects it at no charge. That’s the whole point of a written guarantee. Homeowners we work with have usually been through a bad job before, and a document that holds up a year later is what stops that from happening again.
Why Bradford Remodeling Co Cutler Bay
We’re part of the Garrison Partners family, established in 2004, and each location is independently owned and operated under The Garrison Standard. The Garrison Code is what it sounds like: written price before any work starts, background-checked and uniformed technicians on every job, and a guarantee that stays on the job after we’re done. Our technicians have up to 22 years of experience with tile and substrate work. We install a documented roster of name-brand materials including KraftMaid and Wellborn cabinetry, so specs are traceable and quality isn’t left to guesswork.
If your Cutler Bay kitchen needs a backsplash, tile or flooring job done right the first time, call us at (833) 620-5491 for a free estimate. A live person answers 24/7, and you’ll have a written price before any work starts.
Contact
Call Bradford Remodeling Co Cutler Bay at (833) 620-5491 for a free estimate on your backsplash, tile or flooring project. We measure, we quote in writing, and we back the work with a 365-Day Done Right Promise. A live person picks up, every time.
Written by the team at Bradford Remodeling Co Cutler Bay, serving Cutler Bay.


