







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterGeneral Contractor vs Handyman in Cutler Bay, FL: Which One Can Legally Do Your Job?
Choose a licensed general contractor unless the work is genuinely cosmetic and does not require a permit. In Cutler Bay, that line sits further back than most homeowners expect, because Miami-Dade County ties permits to the High-Velocity Hurricane Zone code, and a handyman cannot pull a building permit. That single fact decides most of these jobs before skill, price or schedule ever enter the conversation. A handyman can swap a faucet. A handyman cannot legally replace a window, a roof or an electrical panel here, no matter how good they are with a nail gun. Call (833) 620-5491 and we’ll tell you plainly which category your project falls into.


Why the Permit Counter, Not Job Size, Is the Real Line
In most of the country, the general contractor vs handyman decision gets framed as a size question. Small job, handyman. Big job, GC. Miami-Dade doesn’t work that way.
A handyman in Miami-Dade County is not licensed to pull a building permit. Full stop. And because this is an HVHZ county, the High-Velocity Hurricane Zone rules trigger permits on a long list of projects that would sail through unpermitted in Georgia or the Carolinas. So the question isn’t “is this job too big for a handyman?” It’s “does this job need a permit?” If the answer is yes, the handyman is legally out, and hiring one puts the work, the warranty and your insurance at risk.
That’s the whole framework. Everything below is detail.
Which Cutler Bay Projects Require a Licensed GC?
These are the common Cutler Bay projects that require a Miami-Dade permit, which means a licensed general contractor, not a handyman:
- Window replacement and impact-glass upgrades. HVHZ requires product approval with a Miami-Dade NOA (Notice of Acceptance) on every opening. A handyman-set window without a permit and product approval fails inspection and can void your wind coverage.
- Roof replacement. Full tear-off and re-roof require a permit and HVHZ-rated materials. We install documented systems like IKO and Atlas so the manufacturer spec and the county paperwork line up.
- Water heater replacement. A straight swap looks simple. It’s still a permitted job, and it’s also where a lot of first-generation Cutler Bay homes have undersized venting that never gets caught.
- Any electrical panel work. Panel changes, service upgrades, new circuits. This is licensed electrical work under a GC’s supervision, and it’s also dangerous. We don’t hand homeowners a DIY walkthrough for a live panel. A trained, licensed electrician handles it.
- Structural wall removal. Knocking out a wall between a 1990s kitchen and family room almost always means a header and an engineer’s letter.
- Room additions and garage conversions. New conditioned space, new load paths, new inspection milestones.
None of those are “GC-only by complexity.” They’re GC-only by law.

What the Insurance and Home-Sale Fallout Actually Looks Like
This is where the decision stops being theoretical. Cutler Bay’s housing stock runs mostly 1980s to 2000s subdivisions and townhomes, and a lot of those original roofs and single-pane windows are now at end-of-life right as carriers demand wind-mitigation upgrades and four-point inspections.
A four-point inspection covers roofing, electrical, plumbing and HVAC. Unpermitted work in Miami-Dade shows up there. When it does, the carrier can refuse to write or renew the policy, and a sale can stall while a buyer’s inspector flags the defect. If you sold the house knowing about unpermitted work and didn’t disclose it, that’s a disclosure problem on your side of the table.
The liability gap is just as real. A licensed GC carries general liability and workers’ comp. Most handymen carry neither. South Florida sees heavy slip-and-fall litigation, and an uninsured worker injured on your Cutler Bay property is your exposure, not theirs. That’s a conversation worth having before anyone climbs a ladder.
The Honest Gray Zone: What a Handyman Can Legally Do Here
We’re not going to pretend every job needs a GC. Plenty of work in Cutler Bay is fine for a handyman, and we’ll say so.
| Job | Handyman OK? | Why |
|---|---|---|
| Interior paint, drywall patching | Yes | Cosmetic, no permit |
| Fixture swap in the same location | Usually yes | No supply or drain lines moved |
| Cabinet door adjustment, hardware | Yes | No structural or rough-in change |
| Full cabinet replacement | No | Often triggers electrical and plumbing permits |
| Moving a sink or shower drain | No | Plumbing permit required |
| Window or door replacement | No | HVHZ product approval and permit |
| Roof repair over a small area | Check first | Scope-dependent; replacement always needs a permit |
| Wall removal, addition, panel work | No | Structural or licensed trade work |
The rule of thumb: if the work touches structure, the building envelope, or a supply/drain/electrical line, it’s a GC job in Cutler Bay. If it’s surface-level in the same spot, a handyman can usually handle it.
Gated Communities, Credentialed Crews, and Site Access
Cutler Bay has a lot of gated communities, including Saga Bay and Old Cutler Bay, and HOA rules there generally don’t let an unidentifiable worker onto the property. That’s not a technicality. It’s how a lot of Cutler Bay remodels get scheduled, and it’s part of why Bradford Remodeling Co Cutler Bay runs background-checked, uniformed technicians on every job. You know who’s coming through the gate before the crew arrives.
For a job that also runs through the permit office and an HVHZ inspection, that discipline matters. We put a written price in front of you before any tool comes out. Every completed project carries the 365-Day Done Right Promise: if the work fails inside that first year, we come back and correct it at no charge. That guarantee isn’t worth the paper it’s on if the work was never permitted in the first place, which is exactly why the GC vs handyman answer matters more here than in most markets.
When the work involves high-tension components like structural framing members under load or a service panel, we don’t ask you to touch it. A trained, licensed professional handles that part, and the inspection record proves it.
What a Cutler Bay GC vs Handyman Job Actually Costs
Here’s how the pricing shakes out for the projects where the permit question decides things. These are realistic Cutler Bay ranges, and a licensed GC provides a written price before work starts so there are no numbers that move at the door:
| Project | Typical Cutler Bay Range |
|---|---|
| Roof replacement | $8,000-$20,000 |
| Roof repair | $400-$1,800 |
| Impact window installation | $8,000-$25,000 |
| Window replacement | $4,500-$15,000 |
| Kitchen remodel | $14,000-$45,000 |
| Bathroom remodel | $9,000-$28,000 |
| Home addition | $45,000-$130,000 |
| Garage conversion | $30,000-$80,000 |
The difference on the front end between a handyman quote and a GC quote is usually the permit fee and the licensed labor, not markup. And a handyman quote on a permitted job isn’t a cheaper price, it’s an invalid one. Call (833) 620-5491 for an exact written quote on your project.
Key Takeaways
- In Miami-Dade, a handyman cannot pull a building permit, which removes them from any HVHZ-triggered work.
- Window replacement, roof replacement, water heater swaps, panel work, structural changes, and additions all require a licensed GC.
- Unpermitted work can stall a four-point inspection, delay a sale, and create a disclosure obligation.
- Licensed GCs carry liability and workers’ comp; most handymen carry neither.
- Cosmetic work and same-location fixture swaps are legitimately handyman territory.
FAQs
A general contractor is licensed to pull building permits and supervise licensed sub-trades, while a handyman in Cutler Bay is not permitted to do either. That means a GC can legally handle HVHZ-regulated work like roof, window and structural jobs, and a handyman cannot, regardless of experience. For anything that touches the building envelope or structure, the GC is the only legal choice. Call (833) 620-5491 and we’ll confirm which category your project falls into.
No. Window and roof replacement in Cutler Bay require Miami-Dade permits and HVHZ product approval, which a handyman cannot obtain. A handyman-performed replacement fails inspection and can put your wind coverage at risk. Licensed GCs like ours handle the permit and the product approval in one pass. Call (833) 620-5491 to schedule an assessment.
Repair is cheaper in the short run and typically runs $400-$1,800, while a full replacement runs $8,000-$20,000 depending on size and material. Once original 1980s and 1990s roofs hit end-of-life, though, repair costs climb and carriers stop renewing. If your four-point inspection is due, replacement is usually the honest answer. Call (833) 620-5491 for a written estimate on both options.
Yes. Four-point inspections and buyer-side checks routinely flag unpermitted work in Miami-Dade, and it can stall or kill a sale. In gated communities around Saga Bay and Old Cutler Bay, HOA records and county permit history are both checkable. Getting the permit right the first time is cheaper than fixing the record later. Call (833) 620-5491 to talk through your situation.
Ready to Get This Squared Away?
If you’d rather have it looked at, Bradford Remodeling Co Cutler Bay offers a no-pressure assessment in Cutler Bay. We give you a written price and a straight answer on whether your project needs a GC. Call (833) 620-5491 for a free estimate, and a live person picks up. For an overview of our full construction services, you can start with our home page.
Written by the team at Bradford Remodeling Co Cutler Bay, serving Cutler Bay, FL.


