







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Cutler Bay Homeowners Choose KraftMaid Construction
We provide independent KraftMaid construction, installation, and repair service in Cutler Bay, FL. That covers full kitchen work, cabinet installation and refacing, countertops, and the door and box repairs KraftMaid cabinetry actually needs in this climate. What makes our KraftMaid work different is that we specify, fit, and finish every job against the factory’s own standards and put the price in writing before a tool comes out. We’re an independent provider. We are not affiliated with, sponsored by, or authorized by KraftMaid. Our technicians have up to 22 years of experience, and the work is backed by our 365-Day Done Right Promise. Call (833) 620-5491 for a free estimate.
Why Trust Bradford Remodeling Co Cutler Bay for Your KraftMaid Construction?

KraftMaid builds cabinetry around a defined box system, a limited set of door constructions, and a finish program that changes with the series. Our technicians know that system because they work on it, not because they sell it. We aren’t affiliated with the manufacturer, and we don’t claim to be. What we do claim is a working knowledge of how each series is put together and where it fails.
That matters in a place where humidity is a constant. A KraftMaid Vantage box in a Cutler Bay kitchen sits in air that holds moisture most of the year, and the weak points show up in predictable places. Our technicians have seen those failures often enough to diagnose them by pattern instead of by guesswork.
On parts, we use OEM KraftMaid doors, drawer fronts, and drawer pulls when color and profile matching decide the outcome. For internal hardware, we’ll sometimes recommend a quality aftermarket soft-close glide or hinge that holds up better under daily use. Every job follows the warranty-safe path: we document what we found, what we replaced, and what we left alone, so nothing in the file undercuts a KraftMaid warranty claim you may still hold.
Every price is written down before work starts, every technician is background-checked and in uniform, and someone answers the phone around the clock. Those are the terms of The Garrison Standard, and they apply to a two-door repair the same way they apply to a full kitchen.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common KraftMaid Construction Problems We Fix in Cutler Bay
- Thermofoil peeling and blistering near the range. The door directly above or beside an oven or cooktop takes years of heat cycling. The foil lifts at the edges and eventually bubbles. The cause is usually adhesive breakdown from heat, not water. A pro can often save the box and replace just those fronts.
- Particleboard swelling at the sink base. Slow leaks and condensation collect at the bottom of a sink cabinet. Particleboard soaks some of it up and doesn’t give it back, so the base softens and the cabinet sags. In Cutler Bay, the humidity speeds that up once a leak starts. Check under the sink after every heavy rain season.
- MDF door panels delaminating at the bottom edge. MDF panel doors with a painted or wrapped finish are vulnerable along the bottom rail, where mop water and floor moisture sit. Once the edge swells, the finish lets go. This shows up most on lower cabinets near dishwashers and sinks.
- Drawer glide screws pulling loose. Repeated loading on a particleboard side panel opens up the screw holes. A drawer that wobbles and then drags usually has one or two stripped screw holes at the glide mount. Sometimes the fix is a better anchor; sometimes the box needs backing.
- Fusion door styles in humid kitchens. Fusion door styles are built to resist exactly this kind of environment, but no door stands up forever to a house that’s closed up all summer. When a Fusion front fails, it’s usually at a joint or edge, and it’s usually localized. That’s a repair, not a kitchen replacement.
Here’s how that plays out in practice. A KraftMaid Vantage kitchen with a dark thermofoil finish often shows peeling and bubbling on the door directly above or beside the range after several years of heat cycling. The usual cause is adhesive breakdown under the foil, not moisture, and a qualified pro typically removes the affected doors, checks the box for swelling, and either replaces just those fronts with OEM-matched doors or refaces the run if several are failing. In a Cutler Bay home, the same visit usually includes checking the sink base for particleboard swelling, since humidity accelerates any slow leak.
KraftMaid Parts & Our Repair-vs-Replace Approach

The parts decision on a KraftMaid job comes down to one question: what actually has to match? If a door or drawer front shows, you want OEM KraftMaid. Color and profile have to line up with the rest of the kitchen, and a generic substitute will show from across the room. For internal hardware, soft-close glides and hinges don’t need to match anything. A quality aftermarket equivalent often costs less and takes more cycles before it wears out.
We source each part for the job in front of us. We don’t stock KraftMaid parts locally, and we won’t claim to. What we do is pull the right part for the series and finish on the work order.
On repair versus replace, the honest line is the box, not the door. A solid kraft-paper or plywood box with cosmetic door wear is usually a repair. Swollen or delaminated particleboard at the base is usually a replacement, because the strength has already left the panel and a new door front won’t fix that. Our technicians will tell you which one you’re looking at, in writing, with a price for each path. Call (833) 620-5491 and we’ll schedule a free estimate.
Our KraftMaid Service Process – Step by Step
- 1
Diagnosis. We open the cabinet, not just the door. On a KraftMaid job that means checking the box edges for swelling, pulling a drawer to inspect the glide mounts, and looking at what the finish is doing at the base. We identify the series and door style so any replacement parts are spec’d correctly.
- 2
Written scope and price. You get the repair or installation plan, the materials, and the price in writing before work begins. No number moves at the door.
- 3
Repair or install. For repairs, OEM fronts go on matched to the existing run, and internal hardware gets upgraded where it makes sense. For a new KraftMaid install, boxes get shimmed and blocked true to the wall, with fasteners long enough to bite into Cutler Bay’s block-wall construction.
- 4
Test and check. Every door swings without rubbing, every drawer closes under its own weight, and every soft-close glide runs the full travel. We check the sink base one more time for moisture before we leave.
- 5
Warranty handoff. You get the signed 365-Day Done Right Promise in your hand at close, along with a clean site. If the work fails inside that year, we come back and correct it at no charge.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Products We Service & Install in Cutler Bay

We work across the KraftMaid lines you’ll find in Cutler Bay homes. That includes the Vantage series, the Prelude series, and the Choice series, each of which uses a different box and door program. We also service and install Fusion door styles where a homeowner wants that look and can live with its maintenance reality in a humid climate.
On the finish side, we handle thermofoil, painted, and stained fronts, matching OEM doors and drawer fronts to the existing run. On the counter side, we install quartz and granite surfaces over KraftMaid boxes. Cabinet installation and refacing, full kitchen remodeling, and quartz and granite countertops are the three sub-services we’re asked for most in this town.
We Also Service These Brands
KraftMaid is one brand in a longer list. We also install and service Kohler fixtures, Cambria and Silestone surfaces, and Toto plumbing in the same kitchens, so a remodel that touches cabinets, counters, and fixtures doesn’t need a second contractor on site. That documented roster is part of how we keep specifications traceable and quality up to a standard instead of a guess.
FAQs – KraftMaid Construction Service in Cutler Bay
Is Bradford Remodeling Co Cutler Bay authorized by KraftMaid? No. We’re an independent KraftMaid service provider, not an authorized dealer or a manufacturer-backed shop. We specify, install, and repair KraftMaid cabinetry to factory standards, but we have no affiliation with the company.
Do you use genuine KraftMaid/OEM parts? Yes, wherever color and profile matching matter. Doors, drawer fronts, and pull hardware get OEM KraftMaid parts so the kitchen reads the same from across the room. For internal hardware like soft-close glides and hinges, we may recommend a quality aftermarket equivalent that holds up better at lower cost.
How long does KraftMaid service take? A door or drawer front swap is usually a single visit. A sink-base repair or a partial reface typically runs a few days once the parts are in hand. A full KraftMaid kitchen install in Cutler Bay runs longer, and we’ll build the schedule around permit approval and the summer rain days that always land in a South Florida build.
What KraftMaid models/series do you cover? We work the Vantage, Prelude, and Choice series and all the Fusion door styles tied to them. If you have a series we haven’t listed, call (833) 620-5491 and we’ll tell you straight whether we cover it.
Will service void my KraftMaid warranty? Not the way we do it. We document what we found and what we changed, use OEM parts where matching matters, and avoid anything that would give the manufacturer grounds to deny a claim. If you still hold an active KraftMaid warranty, tell us at diagnosis and we’ll work around it.
How much does KraftMaid construction cost in Cutler Bay? It depends on scope. Here are the ranges we quote in this market by line item:
| KraftMaid Service | Typical Range in Cutler Bay |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Full Kitchen Remodel | $14,000 – $45,000 |
Call (833) 620-5491 for an exact quote on your KraftMaid work. Estimates are free, and the price you get comes in writing.
Book Your KraftMaid Service in Cutler Bay, FL
Whether it’s a peeling thermofoil front, a sink base that’s taken on water, or a full KraftMaid kitchen going into a Cutler Bay home, we’ll put the scope and the price in writing before we start and stand behind the work for a full year. Call (833) 620-5491 to schedule your free estimate.
Written by the team at Bradford Remodeling Co Cutler Bay.












