







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWalk-In Shower Cost in Cutler Bay, FL: What You’ll Actually Pay and Why
A walk-in shower in Cutler Bay runs $4,500 to $12,000 for the shower itself, and a full bathroom remodel that includes one lands between $9,000 and $28,000. National cost guides quote $3,500 to $15,000, but those numbers skip three things Miami-Dade County adds: the licensed-plumber requirement under the general permit, a waterproofing spec built for concrete slab construction, and curb-and-bench material at real stone prices. Call (833) 620-5491 for a written price before work starts. We answer live, 24/7.


Why Cutler Bay Showers Cost More Than the Guides Say
Cutler Bay was incorporated in 2005 largely to control its own growth, and most of its housing is 1980s-to-2000s subdivision and townhome construction on what used to be farmland and pine rockland west of US 1. That matters for a shower because the plumbing sits in a concrete slab. There’s no crawlspace to work from, no joist bay to thread a drain through. Relocating a drain means cutting slab, extending the rough-in, and re-pouring around a code-compliant connection. A licensed plumber has to pull that portion of the work, and Miami-Dade enforces it.
Everything here also runs through the High-Velocity Hurricane Zone code that came out of Andrew. That code shapes product selection, permitting, and scheduling in ways an inland city never encounters. And the humidity is its own line item. Coastal South Florida air sits heavy with salt and moisture ten months out of the year, and a shower that isn’t detailed for it grows mold behind the tile by year four.
Here’s the practical version: the price difference between Cutler Bay and a national average isn’t labor greed. It’s permit scope, plumber licensing, and waterproofing done to a standard that survives a Florida slab.
What Drives the Price: Line Items, Not a Blended Number
When we write a shower price, it’s itemized. Every line has a number attached before a tool comes out, because the alternative is the surprise invoice you’ve probably already lived through once. Bradford Remodeling Co Cutler Bay works under The Garrison Standard, which means the written price is non-negotiable and nothing moves at the door.
| Line item | Typical range |
|---|---|
| Demo and haul-away (old surround, pan, tile) | $400 - $900 |
| Waterproofing membrane (Schluter Kerdi or RedGard) | $600 - $1,400 |
| Licensed plumber for drain relocation / rough-in | $800 - $2,200 |
| Tile labor at South Florida market rate | $1,800 - $4,500 |
| Glass enclosure (permit + installation) | $1,200 - $3,200 |
| Kohler or Moen valve body + trim kit | $450 - $1,200 |
| Linear drain upgrade instead of point drain | +$400 - $800 |
Add those up and you’re inside the $4,500 to $12,000 range for the shower, which is why a bathroom remodel that includes new flooring, a vanity, and lighting lands at $9,000 to $28,000. The scope is bigger. The shower line itself doesn’t balloon.

Linear Drain or Point Drain? The Slab Answer
A linear drain adds $400 to $800 to a Cutler Bay shower. On a slab, it’s usually worth it, and here’s why in trade terms.
A point drain needs four planes of slope meeting at one small square. That’s fine for small tile. Large-format tile, the 12-by-24 or 24-by-48 porcelain that’s standard in modern work, can’t bend across four planes without lippage, the trade word for one tile edge sitting proud of its neighbor. A linear drain gives you a single-plane slope: the floor tilts one direction to a channel. Large tile lays flat.
The cost is in the slab. A linear drain body is longer and deeper than a point drain, so the slab cut is wider and the waterproofing has more seams to seal. That’s why the plumber and the tile setter both have to be on the same page at rough-in. If they aren’t, the membrane gets breached, and a breached membrane on a slab has nowhere to drain. Water sits against concrete and wicks into the wall cavity.
For the broader picture of how the shower fits into a full bath build, see our Bathroom Remodeling in Cutler Bay page.
Valve Body vs. Trim Kit: The Detail Homeowners Miss
The valve body is the brass rough-in that lives inside the wall. It connects to the hot and cold supply and controls the mix. The trim kit is the visible part: the handle, the escutcheon plate, the showerhead. They’re sold as a pair but they’re two different things.

We spec the valve body at install time because it’s behind the membrane. Swapping a trim kit three years later is a surface job; a Moen or Kohler finish change doesn’t touch the waterproofing. Swapping the valve body means opening the wall, which means opening the membrane. So it’s worth getting right the first time. We work from a documented roster of Kohler and Moen fixtures so the part number on the spec sheet is the part number on the wall, and any future trim swap carries the same manufacturer’s warranty.
The same logic applies to stone. A Cambria or Caesarstone bench or curb costs more than the cultured marble every cost guide assumes. It also doesn’t stain the way cultured marble does in a humid shower, and it carries a manufacturer warranty that supports our own.
Two Cheap Decisions That Prevent a $2,000 Mold Bill
Cutler Bay’s humidity makes two rough-in choices into long-term cost drivers.
- Grout: Epoxy grout costs roughly $200 more than sanded Portland cement grout on a standard shower. Epoxy doesn’t absorb water and doesn’t support mold growth the way cementitious grout does in a shower that never fully dries. In this climate, that’s the right $200.
- Backer board: Cement board is the traditional choice. Foam tile backer, like the Kerdi board system, is lighter, doesn’t wick, and bonds directly to the membrane. We use both depending on the substrate, but on a humid coastal shower the foam system usually wins.
Spend the $200 at rough-in. It’s cheaper than mold remediation in year four, and remediation means tearing out the shower you just paid for.
What the Warranty Covers on Waterproofing
The 365-Day Done Right Promise is a written year-long guarantee on every completed project. If the work fails inside that window, Bradford returns and corrects it at no charge. On a shower, that means the guarantee names the waterproofing product by name, Schluter Kerdi or RedGard, not just “shower work.” A failed pan liner or a membrane breach in the first year is covered. Full stop.
Our technicians have up to 22 years of experience, and they’re background-checked and uniformed, so you know who’s walking through the door before the crew arrives. The written guarantee is in your hand at close, the site is clean, and the permit is signed off before we call the job done.
FAQs
A walk-in shower in Cutler Bay costs $4,500 to $12,000 for the shower alone; a full bathroom remodel including one runs $9,000 to $28,000. The range depends on drain type, tile size, stone benches or curbs, and whether the drain moves. Call (833) 620-5491 for an exact written price, free.
Yes. Miami-Dade County requires a general permit for a shower rebuild that touches plumbing, and a licensed plumber must pull the drain work. Cutting the slab to relocate a drain is plumbing, not tile work, and it’s inspected. Bradford handles the permit paperwork as part of the written scope.
Repair is cheaper if the waterproofing is intact and the failure is cosmetic: a cracked tile, a failing grout line, a leaky trim. Once water has reached the backer board or the slab, replacement is cheaper than a repair that fails again in 18 months. A walk-in shower replacement runs $3,000 to $8,500; full installation with a drain move is $4,500 to $12,000.
Yes, and it adds $400 to $800 to the job. The drain body cuts deeper into the slab than a point drain, so the plumber widens the cut and the tile setter runs a single-plane slope to the channel. It simplifies large-format tile and it’s the better install in slab construction.
Get a Written Price Before Any Work Starts
Call (833) 620-5491 and a live person picks up, any hour. We’ll walk your Cutler Bay shower, write the line-item price, and put the 365-Day Done Right Promise in writing. No surprise numbers at the door, no voicemail queue. Free estimate, straight number, squared away before a tool comes out.
Written by the team at Bradford Remodeling Co Cutler Bay, serving Cutler Bay, FL.
What Our Customers Say
"Great work. Countertop install slipped by a week, but they explained and kept us informed."
- Nora L."Respectful crew. Covered the floors and swept every day."
- Jackie T."Painting and drywall repair were flawless. They patched the drywall seams and the paint matches the old wall."
- Cal P.












